In order to improve the safety of the experimental operators and ensure the normal use of the laboratory furniture, the laboratory should be inspected after the renovation, and the main functional facilities such as the fume hood, test bench, sink, ventilation pipe and medicine cabinet meet the requirements before signing for normal use. .
How to carry out the inspection of the laboratory decoration? Need to pay attention to what places to accept, the following is a detailed introduction for everyone:
Because the whole box of the laboratory fume hood is made of polymer composite material, it is floor-standing. When checking, it mainly looks at acid and alkali resistance, corrosion resistance and flame retardancy. Check whether it is refurbished. Also check whether it will be Peeling, rusting, deformation, etc. In order to completely eliminate the harmful gases, the four air ducts are used for ventilation, and several wind ducts are used for inspection during the inspection. The cabinet inside the fume hood is usually made of high-quality and environmentally-friendly E1 medium-density board and 15mm thick double-sided adhesive melamine board. All the sections of the board will be treated with PVC hot-melt adhesive waterproof sealing, and then with special mold PVC dark handles. Product power control system. When inspecting the inner cabinet, check the selected wooden substrate and power control system.
Check the test bench according to different laboratories to check whether the selected test bench material meets the requirements of the laboratory, and whether it has the advantages of corrosion resistance, rust resistance, strong acid and alkali resistance, high temperature resistance, etc. If you choose a laboratory-specific composite ceramic countertop, the thickness should be 30mm and the inner lining is 8mm.
The hinges used in the laboratory are required to have the advantages of acid and alkali resistance, corrosion resistance, wear resistance, and rust resistance. It is also required to have a strong bearing capacity of 75 kg or more. Most of the feet selected by the laboratory are equipped with load-bearing movable wheels. They are equipped with adjustable fixed feet of stainless steel and nylon. They have the advantages of non-slip shock absorption and height adjustment. The adjustable height should be between 30-50mm. To extend the service life, a dust jacket should also be provided. The sink is usually made of PP material to check whether the brand selected by the single nozzle and the water separator meets the contract requirements. It is also necessary to check the comprehensive performance control system consisting of power control, fan control, and instrument power control used in the laboratory design and distribution equipment, and whether the installed explosion-proof fluorescent lamps use international general-purpose brand products.
Finally, check whether the ventilation and piping system has the advantages of corrosion resistance, explosion-proof, low energy consumption, low noise, etc. The selected fan is equipped with polymer composite material mold forming pipe surface is shiny and bright. Check if the operating noise of the system is below 60 decibels.
BOKA Boka Lab's high-end customized one-stop service platform is based on Guangzhou Boka Laboratory System Technology Co., Ltd., with laboratory construction as the basic point, integrating laboratory resource integration and resource allocation with high-end laboratory customization. One-stop service platform, including business planning and design of green scientific research building, laboratory overall planning consultation, laboratory internal construction engineering, laboratory furniture product customization, laboratory instrument consumables, laboratory operation maintenance, laboratory relocation, experiment Laboratory high-end customized services such as room online shopping mall consultation, laboratory offline experience library