How to choose high quality and practical Lab Furniture?
The price is cheap or not, depending on the relative value rather than absolute value, such as the purchase of a relatively cheap price and a slightly higher price of Lab Furniture, cheap with a period of time on the bad or continuous quality problems, and not Because of its delay in the work and income, and expensive you can use a few years, nor because of high efficiency and benefits and opportunities. It seems that the price is slightly higher than the Lab Furniture is cheaper? The so-called penny goods, do not just look at the cheap, many customers have chosen cheap Lab Furniture, but finally because of quality problems, Had to re-purchase in a short time. Good Lab Furniture can be used for ten years or longer, and almost can use two or three years on the good.
Selection of quality Lab Furniture selection criteria:
1, the best direct purchase with the manufacturers, and the choice of manufacturers must be after the sale of security and credibility.
2, hardware accessories should also pay attention, such as slide rails, hinges, if not selected, may cause Lab Furniture is good, but the accessories are broken, affecting the use and beauty.
3, the pool table must not use the surface of the pavement physical and chemical board, or very capacity in the long-term water bubble and foaming off or cracking and so on.
4, the plate should be clear, the Lab Furniture used in the plate a little difference, will give our manufacturers to bring different procurement costs, especially the table should choose a more mature brand or performance more stable brand.
5, pay attention to the edge of the Lab Furniture, sealing is thick and solid. And edge rubber should pay attention to not smell, should be environmentally friendly.
6, there is steel wood Lab Furniture, depends on the thickness of the entire pipe, spray coating adhesion, and anti-corrosion performance, these should be carefully considered.
7, product design concept or process innovation is also very important, do not go into here, their own to pondering.
Above is the choice of Lab Furniture reference factors, the next time to buy Lab Furniture, I hope this article can help friends.
Lab Furniture has a variety of materials, some wood material, some steel material, some steel material, different materials will apply to different environments. Some of the experimental requirements of the furniture material is not high, will not cause great pollution to the furniture, only need to choose a relatively weak material furniture, this type of furniture is usually cheaper in the price, but the maintenance time is also more difficult The
If the experiment is often a chemical reagent contamination, the experimental process, the experimental furniture to carry the task is particularly heavy, then you have to choose the quality of the better furniture. In general, just material is certainly much better than wood quality, and is not susceptible to pollution. Now many experimental equipment, furniture will choose all-steel material, to meet the needs of a variety of experiments, but also to facilitate the laboratory to maintain a new look. Changes in the quality of furniture is the inevitable development of the industry, in the continuous practice of research, the furniture industry is also changing with each passing day. Furniture is becoming more and more high quality, but people's demands are becoming more and more high. Now the market has been completely formed by the stainless steel of experimental furniture, which is another innovation. Laboratory all the experimental equipment, furniture, most afraid of is a long time, will rust and corrosion, with stainless steel materials, laboratory equipment, furniture, make the laboratory long in a relatively clean environment, you can also To ensure that all experimental equipment can improve the service life. The development of science every day new changes, but also continue to have new and more beautiful and practical materials to show in the world before, and soon there will be new and more suitable materials to replace the current material, so the appearance of the laboratory is also very quickly.