(1) The most ideal structure for layout
The standard PCR laboratory uses a fully automated quantitative PCR detection system, so only three experimental areas are set up, namely: reagent preparation area, specimen preparation area and PCR amplification area, and corresponding buffer area I buffer area II and buffer area III. Allow the staff to enter the buffer zone to change the work clothes before entering the experimental area. Reagents and specimens are passed directly into the specimen preparation area and PCR amplification area through the transfer.
(2) Standard air pressure setting requirements
In order to prevent the reagents and specimens from being contaminated by aerosols and the contamination of personnel and the environment during the entire PCR experiment, each experimental area in the standard PCR laboratory is set with a certain relative pressure to ensure personnel, environment and specimens from the facility. safety.
(3) Strict protective measures
A biological safety cabinet is installed inside the specimen preparation area, and the specimen preparation is carried out in the biological safety cabinet. The ventilation system of the biological safety cabinet ensures the safety of personnel and specimens, prevents the contamination of personnel and specimens by aerosols, and the interior of the biological safety cabinet is clean The degree reaches 100. Ultraviolet lamps are installed on the top of the three experimental areas and three buffer zones, as well as inside the biological safety cabinets and transmissions for disinfection. Reagents and specimens are transferred through electronic chain stainless steel to ensure that the reagents and specimens will not be contaminated during the transfer process. Set up mobile UV lamps in the reagent preparation area and specimen preparation area to sterilize the laboratory table.
(4) Concise and clean appearance
The SL-6040A standard PCR laboratory is mainly composed of color steel plates, aluminum alloy profiles and glass. Its four corners are supported by aluminum alloy round corner columns. The inner corners of the laboratory are decorated with aluminum alloy round corners. The structure is solid, the lines are simple, and the appearance is elegant. , Good sealing.
(5) Modular design
Components are tested internally by the original factory and assembled on site. It can be produced in large quantities, with high production efficiency and stable and reliable quality, so that costs are effectively controlled and installation is convenient.
(6) Standardized design
Set standard laboratory size, fully save space, meet the needs of different customers, and provide standardized quality management document model (including quality manual, procedure document, SOP document). The settings and quality management documents of the laboratory have been verified by many experts and many hospitals, and meet the acceptance standards of the Ministry of Health.
(8) Centralized control
All switches are installed on the switch panel for centralized control.
(9) Humanized design
The positions of the workbench, transfer window, sink and faucet in each experimental area are all designed according to ergonomics. In addition, telephone, internet and air conditioning connections are reserved in each experimental area